What is the hardness of the wheel surface of VXPUSeries?
VXPUSeriesWheel surface hardness is 90° Shore A.
VXPUSeries
Ultra-high load capacity type Wheel
XPU Outsourcing + Iron Core / Cast Iron Core
Wheel surface hardness ○ ○ ○ ● ○ 90° Shore A
Temperature range ○ ● ● ○ ○ -30℃ to +70℃
Smooth scrolling ● ● ● ● ○ Excellent
Silent performance ● ● ● ○ ○ Good
Protect the floor ● ● ● ○ ○ Good
Product Introduction
VXPUSeries adopts ultra-high load capacity Wheel, XPU outer shell + Iron Core / cast Iron Core design, wheel surface hardness 90° Shore A, applicable temperature range -30℃ to +70℃, rolling smoothness: excellent, silent performance: good, floor protection: good, Suitable for a variety of industrial and commercial handling scenarios.
Suitable Equipment
Product Features
Selection Guide
If the Equipment application meets scenarios such as heavy-duty Industrial handling Equipment, electric forklifts and high-speed Industrial Equipment, VXPUSeries is a suitable choice; the actual Specification can be based on load capacity, ground and environmental requirements, please contact us to confirm the appropriate Wheel material and size.
Wheel noodles
The design concept of XPUWheel is that the wheel can load high loads when operating at high speeds. The wheel surface hardness of XPUWheel is 90°±3°, which has excellent mechanical properties, including the ability to maintain high loads during high-speed movement, excellent wear resistance, and is not prone to permanent deformation. XPUWheel also has excellent ability to suppress endogenous heat generation. Suitable for forklifts, electric stackers, heavy machinery, AGV and automatic Industrial.
Wheel box
Inner frame: Iron Core / Cast Iron Core
feature
•Resistant to chemicals, solvents and erosion
•Wear-resistant
•Applicable ambient temperature: -30°C~+70°C
•Under normal use, no maintenance required
Specification
| Product number | Wheel Trail (D)【mm】 |
Wheel width (T2)【mm】 |
load capacity 【kg(lbs)】 |
Bearing inner diameter Ø(d)【mm】 |
Medium width (T1)【mm】 |
Wheel noodles | Bearing |
| 12036906186171 | 150 | 42 | 700kg (1543lbs) | 17 | 42 | Round | Precision ball bearings |
| 12036906186271 | 150 | 42 | 700kg (1543lbs) | 20 | 42 | ||
| 12036906306171 | 150 | 75 | 1100kg (2425lbs) | 20 | 75 | ||
| 12036906306271 | 150 | 75 | 1100kg (2425lbs) | 25 | 75 | ||
| 12036907206171 | 180 | 50 | 850kg (1874lbs) | 20 | 50 | ||
| 12036907206271 | 180 | 50 | 850kg (1874lbs) | 25 | 50 | ||
| 12036908206171 | 200 | 50 | 1000kg (2205lbs) | 20 | 50 | ||
| 12036908206271 | 200 | 50 | 1000kg (2205lbs) | 25 | 50 | ||
| 12035108206371 | 200 | 50 | 1000kg (2205lbs) | 30 | 50 | ||
| 12035108206471 | 200 | 50 | 1000kg (2205lbs) | 35 | 50 | ||
| 12035108206571 | 200 | 50 | 1000kg (2205lbs) | 40 | 50 | ||
| 12036910256171 | 250 | 62 | 1500kg (3307lbs) | 20 | 61 | ||
| 12036910256271 | 250 | 62 | 1500kg (3307lbs) | 25 | 61 | ||
| 12036910256371 | 250 | 62 | 1500kg (3307lbs) | 30 | 61 | ||
| 12036910256471 | 250 | 62 | 1500kg (3307lbs) | 35 | 61 | ||
| 12036912356171 | 300 | 90 | 1800kg (3968lbs) | 30 | 90 | ||
| 12036912356271 | 300 | 90 | 1800kg (3968lbs) | 35 | 90 | ||
| 12036914356201 | 350 | 90 | 2500kg (5512lbs) | 35 | 90 | ||
| 12036914356101 | 350 | 90 | 2500kg (5512lbs) | 40 | 90 | ||
| 12036914356301 | 350 | 90 | 2500kg (5512lbs) | 45 | 90 | ||
| 12036914356401 | 350 | 90 | 2500kg (5512lbs) | 50 | 90 | ||
| 12036910306171 | 250 | 80 | 2000kg (4409lbs) | 25 | 90 | Flat | |
| 12036910306271 | 250 | 80 | 2000kg (4409lbs) | 30 | 90 | ||
| 12036910306371 | 250 | 80 | 2000kg (4409lbs) | 35 | 90 | ||
| 12036912356371 | 300 | 90 | 2400kg (5291lbs) | 30 | 90 | ||
| 12036912356471 | 300 | 90 | 2400kg (5291lbs) | 35 | 90 | ||
| 12036916406171 | 400 | 100 | 3800kg (8378lbs) | 35 | 100 | ||
| 12036916406271 | 400 | 100 | 3800kg (8378lbs) | 40 | 100 | ||
| 12036916406371 | 400 | 100 | 3800kg (8378lbs) | 45 | 100 | ||
| 12036916406471 | 400 | 100 | 3800kg (8378lbs) | 50 | 100 |
